【Yunkang welding supply edit】

    Friends, as we all know, welding positioner, as a welding auxiliary equipment, plays an important role in welding and other work. But before starting the welding positioner, we must do a good job of inspection and maintenance, which is related to our work efficiency and safety!

    First, check the overall appearance of the welding positioner. See if there is any obvious damage, deformation or corrosion. If so, it cannot be taken lightly and needs to be dealt with quickly, otherwise it may cause big problems at work.

    Next, check whether the connections of each component are firm. The base, slewing mechanism, tilting mechanism, etc., all must be checked. Loose connections will make the positioner unstable during operation, affecting the welding quality and may also bring safety hazards.

    The transmission system is also critical. The motor, reducer, gears, chain, etc., must ensure that they operate normally without abnormal noise, jamming or looseness. At the same time, don't forget to check the lubrication to keep the transmission parts in good working condition.

    The workbench should also be carefully inspected. The surface should be flat, without oil stains or debris that affect the placement of the workpiece. The fixtures and positioning devices should be firm and reliable so that the workpiece can be firmly fixed.

    The electrical part is equally important. The power connection should be firm, without looseness or poor contact. The control box should be in good condition, the internal electrical components should be connected correctly, and the buttons, switches, and indicator lights on the control panel should all work properly. The cables and wires should be neat and undamaged.

    Safety devices must be checked in place. The emergency stop button must work properly, the limit device must accurately limit the range of motion of the equipment, and the safety protection door must effectively protect the operator.

    Doing a good job of inspection and maintenance before the welding positioner can not only improve work efficiency, but also ensure our safety. Everyone must pay attention to it and let the positioner help our work and become our welding assistant instead of causing trouble.