【雲康溶接供給編集】

    Dear friends, today I will share with you how to debug the welding positioner.

    The welding positioner is a great helper in the field of industrial welding, but it will be troublesome if it is not debugged properly.

    First of all, before debugging, you must carefully check whether the various components of the equipment are firmly installed and the connection is reliable. Especially the wires, air pipes, etc., must not be loose or damaged.

    Next, adjust the angle and speed of the welding positioner. According to the requirements of the welding process, adjust the positioner to the appropriate angle to ensure the best welding position. Speed adjustment is also critical. Adjust the rotation speed of the welding turntable and select the appropriate speed according to the requirements of the welding process.

    Then, perform a no-load operation test. Start the positioner and observe whether it runs smoothly and whether there is any abnormal noise or vibration. If there is a problem, the cause of the fault should be promptly investigated.

    During the debugging process, you can also perform simulated operations in combination with actual welding workpieces. This can better test the performance and debugging effect of the positioner.

    Finally, be sure to pay attention to safety! Wear protective equipment during debugging to avoid accidents.